This jumperless
socket 423 motherboard is based on Intel i850 chipset,
and is designed for P4 processors. The board features 1
CNR, 4 PCI, AGP 4x, 4-184 pin gold-lead RIMM sockets,
and ICH2 chipset which provides on-board audio(AC'97),
and support of UDMA 100.
Features/Specifications
Processor
Intel Socket 423 Pentium 4: 1.4GHz ~ 2.0GHz+
400MHz Intel NetBurst Micro-Architecture System Bus
Chipset
Intel® 850 chipset
Up to 2GB maximum
memory (RAMBUS).
AGP Pro interface
with 4x SBA/Data Transfer.
Intel® ICH2 chipset
AC97 Controller
Integrated.
2 full IDE channels,
up to ATA100.
Low pin count
interface for SIO.
4 USB ports.
FSB
Supports 400MHz FSB
Memory
Four 184-pin gold-lead RIMM sockets
Supports a maximum memory size of 2GB.
Expansion Slots
One AGP (Accelerated Graphics Port)
slot.
Support up to 4x mode.
One CNR (Communication Network
Riser) slot.
Four 32-bit/33MHz Master PCI Bus
slots.
Supports 3.3v/5v PCI bus Interface.
On-Board IDE
An IDE controller on ICH2 provides
IDE HDD/CD-ROM with PIO, Bus Master and Ultra DMA
100 operation modes.
Can connect up to four IDE devices.
Audio
ICH2 Chipset integrated onboard 3D Sound
AC'97 Codec
On-Board Peripherals
On-Board Peripherals include:
1 Floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M and
2.88Mbytes.
2 Serial ports (COM A + COM B)
1 Parallel port supports SPP/EPP/ECP mode
4 USB ports (Pear x 2 / Front x 2)
1 IrDA connector for SIR
Integrated Super I/O Controller
Winbond W83627HF-AW I/O controller.
1 Floppy port supports 2 FDD with
360K, 720K, 1.2M, 1.44M and 2.88Mbytes.
2 Serial ports (COM A + COM B)
4 USB ports
1 Parallel port supports SPP/EPP/ECP
mode.
1 Audio/Game port, 1 IrDA connector
for SIR
BIOS
The mainboard BIOS provides "Plug & Play" Flash BIOS which detects
the peripheral devices and expansion cards of the
board automatically.
IDE drive auto configure, Advanced
Power Management (APM)1.2, ACPI 1.0, DMI2.0, ECC/Parity
support.
Accessories
Driver CD
UltraDMA/100 & Floppy Cable
CPU Retention
Dimension
30.4 cm(L) x 22.9 cm(W) ATX Form Factor
Mounting
12 mounting holes.
Product
Requirements
You need an ATX12V power supply, preferably 300
Watts or higher
