SMC Etherpower II  10/100, PCI Dual Channel 10/100 Server Adapter

SMC Etherpower II 10/100, PCI Dual Channel 10/100 Server Adapter
Product Number SMC9334BDT Shipping Weight 1.0 lbs
Warranty Period 1 Year Manufacturer SMC
Condition New Manufacturer Part No. SMC9334BDT
Packaging OEM Support Contact Dealer
 In Stock and Ready To Ship!
SMC's dual-channel EtherPower™ 10/100 PCI network card combines the functionality of two separate Fast Ethernet cards, each capable of dual-speed operation in half- or full-duplex mode, with superior performance and exceptional ease of installation.

The card occupies only one slot in a PCI server, yet it provides two independent channels, each supporting its own collision domain. This enables you to segment your network and double its bandwidth while saving a slot in your server. And, the price is typically lower than that of two single-channel PCI cards.

Each channel can operate independently at either 10 or 100 Mbps, so it's easy to future-proof your network. You can connect both channels to a 10BASE-T hub or switch today. When you need to migrate to Fast Ethernet for additional bandwidth, switch one channel to a 100BASE-TX device. Or use both channels at the faster data rate to create two Fast Ethernet segments.

This 32-bit card supports the Auto-Negotiation standard, so each channel is automatically configured to run at the highest possible operating mode (10/100 Mbps, half/full duplex). And, it incorporates SimulTasking™ technology, SMC's unique pipelined data transfer technique, with bus-master design and very low CPU utilization for enhanced performance and improved network efficiency.

The EtherPower 10/100 card comes with a full complement of drivers for all popular network operating systems, a lifetime warranty and the industry's best, free Technical Support. For little more than the price of our 10 Mbps dual-channel PCI card, the dual-channel EtherPower 10/100 gives you ten times the performance!!
  • SMC Etherpower II 10/100, PCI Dual Channel 10/100 Server Adapter
  • Features:
  • Auto-Negotiation for automatic selection of the optimum data rate and operating mode
  • Dual-channel operation doubles network bandwidth in a single PCI slot
  • Low CPU utilization
  • Full-duplex operation at both data rates doubles available network bandwidth
  • 32-bit PCI bus-master operation
  • 400 Mbps full-duplex server-to-switch connection eliminates bottlenecks and maximizes throughput
  • Dynamic failover across both channels to eliminate data loss
  • Network traffic load balancing/failover software for increased performance
  • Data path and network port redundancy
  • Limited lifetime warranty
  • EZDiag™ network card diagnostic utility simplifies monitoring and troubleshooting
  • Diagnostic LEDs indicate operating mode (half/full duplex), link integrity and data rate
  • Allows multiple TigerArrays to be combined and configured in a single server
  • Balances IP, IPX and NetBEUI traffic
  • Dual channels save one expansion slot
  • Single RJ-45 connector on each channel for operation at both data rates
  • Free pre- and post-purchase technical support
  • Automatic detection and SNMP notification of link, card or cabling errors
  • Specifications:
  • Compatability
  • Warranty - Limited lifetime
  • Safety and EMI - CE Mark, Safety, UL 1950, EN60950 (TĐV), CSA 22.2 No. 950 (UL) Emissions FCC Class B CDOC Class B BMPT Vfg 243/1991 EN55022 (CISPR 22) Class B VCCI Class 2
  • Size - 5.4 in. x 4.2 in. (13.7 cm x 10.7 cm)
  • Weight - 3.9 oz. (110 gm)
  • LED indicators - Network Activity, 1 per channel Link Integrity, 1 per channel Data Rate (10/100), 1 per channel Full/Half Duplex, 1 per channel
  • Humidity - Operating 10% to 90%, Storage 5% to 95%
  • Temperature - Operating 32° to 131° F (0° to 55° C) Storage -4° to 158° F (-20° to 70° C)
  • Power Requirement - +5 VDC ± 5% @ 1595 mA (typical), 2279 mA (maximum)
  • Interface - 100BASE-TX; UTP cable, 2 wire pairs EIA/TIA Category 5, 10BASE-T: UTP cable, 2 wire pairs EIA/TIA Categories 3, 4, 5
  • Standards - IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet ISO/IEC 8802-3 Ethernet, PCI v2.1 compatible PCI-to-PCI Bridge Specification v1.0
Product Requirements
  • PCI Slot
Informational Links
  • None
Back to Top Back to Descriptions