This Firewire
IEEE 1394A CardBus card uses the most advanced,
high-speed digital technology, low-cost and high
bandwidth isochronous (real-time) data interfacing
between computers, computer peripherals and consumer
electronics products such as camcorders, VCRs, printers,
TVs, and digital cameras.
Connect this PC Card adapter to any
type II PCMCIA slot and instantly add Three FireWire
Ports! Exchange data quickly, at up to 400Mbps with any
FireWire device! Exchange digital pictures, music or
whatever else you can imagine! Get one today!!
One (1) 400 Mbps FireWire/IEEE 1394
3-Ports 32-bit CardBus PC Card
One (1) 6-pin to 4-pin
FireWire/1394 cable (2-feet)
One (1) Ulead VideoStudio DV
Version 5.0 CD
1 power adapter port for standard
power output (power adapter cable to PS/2 keyboard
included - useful when needing more power, such as
external drives)
General Features:
Uses NEC Chipset
IEEE 1394 Connectors: 3 x 6-Pins
External 1394A Ports
Add Three FireWire Ports to your PC
or Mac Notebook
IEEE 1394, IEEE 1394a Compliant
Supports 1394 data transfer rate
speeds of up to 100, 200, and 400 Mbps
Automatically Uses the Highest
Speed the Peripheral Supports
Fully Plug-N-Play and Hot-Swap
compatible
Hot-Plug enables instant linking
with extended devices such as DV cameras, DVD
players, digital cameras, scanners, MP3, or printers
without rebooting during the computer operation
Automatically identifies Hot-Plug
devices and integrates them into
Windows 98/ME/2000/XP
No need to turn off the system
while adding or removing 1394 devices
Enables many new PC applications
such as real-time digital video
Connect digital camcorders, hard
drives, CD-RWs, and other FireWire devices
Designed to function both as a
cable-connected virtual bus and
as a backplane bus
Low power consumption
True Plug and Play - Windows uses
built in drivers
Automatic configuration; no IDs or
terminators necessary
Fully compliant with 32-bit CardBus
and PCMCIA Type II specification
Supports up to 63 devices in
peer-to-peer configuration
Compliant with Open Host Controller
Interface (OHCI) 1.0 specification
PCMCIA CardBus interface with power
management
Dimensions: 115.5 x 54 x 13.8 mm
Product
Requirements
Pentium or equivalent portable
computer
One available CardBus Type II slot
Supports Windows 98/98SE/ME/2000/XP
and future Windows OS Platforms